phone
Bill's Drywall Chicago Drywall Contractors.

5 Pro Tips for Dealing with Mold on Drywall

5 Pro Tips for Dealing with Mold on Drywall

Mold on drywall is unsightly, but there’s no reason to panic. Here are five of the best tips to help you kill the mold, clean it off, and make sure it doesn’t come back again.

The drywall in your shower was meant to provide a low-maintenance backdrop, but it’s also a mold incubator.

Mold loves moisture, which makes your shower, tub, or bathroom generally a hospitable place to be. If you see mold on drywall, then you need to kill it quickly. If you’re able to stop it early, you’ll save your wall and a whole lot of time and effort.

Fail to prevent it from taking over, and it will eat into your wall. Plus, the mold isn’t an aesthetic issue you can learn to live with. It triggers allergies and respiratory diseases, so getting rid of it quickly is vital for creating a healthy home environment.

Not sure how to remove mold from drywall? We’ve got five simple answers.

5 Ways to Get Rid of Mold on Drywall

Choose one of these five methods for killing mold on drywall. Make your choice dependent on the severity of the mold growth.

Don’t forget to wear the property safety equipment including goggles, gloves, and respirators if working with toxic chemicals. Ventilate the room well after you’ve finished.

1. Water and Bleach

If the mold is still in its early stages, you can mix half a cup of bleach with a quart of water to create a mold-killing agent.

Mix it well and then brush it onto the mold areas of the drywall until the mold goes away.

When done, wipe down the surface to remove excess moisture. Do not rinse it. Leaving the bleach on the drywall allows it to kill spores hiding inside the material.

2. Household Detergent

The cleaning aisle in your local store will likely feature multiple types of mold remover. Most of these work specifically with black mold, so keep the kind of fungus in mind when purchasing a product.

3. Vinegar and Water

If you’re doing your best to avoid chemicals, create a mixture of equal parts water and vinegar to serve as a cleaning solution It will get rid of some mold, but it only works on 82 percent of spores and large, settled infestations might not respond well to it.

4. Hydrogen Peroxide

Hydrogen peroxide works as well as bleach, but it finds itself in a lower spot because it might damage your paint job.

Be sure to use only a 3 percent solution, and spot test it before covering your wall with it. If you’re happy to proceed, spray it onto the mold and let it rest for a minimum of 10 minutes before wiping it down.

5. Ammonia

Ammonia is a toxic chemical, and you shouldn’t open it in your home unless you have no other choice. What’s more, drywall doesn’t absorb it as well as bleach.

If you use the ammonia method, keep two things in mind. First, never use it after bleaching the wall. The two chemicals form a toxic gas when they meet. Additionally, only use clear ammonia in your home.

Keep Your Drywall Mold-Free for a Healthy Home

Drywall is a low maintenance wall surface, but it does breed mold in rooms with a lot of moisture and low ventilation.

If you note mold on drywall in your house, take care of it quickly to avoid it spreading. If it’s too late already, don’t breathe in any more mold spores. Call us today to get your drywall repaired and make your bathroom an easy place to breathe.

Top 5 Causes Of Drywall Damage

Top 5 Causes of Drywall Damage

Fixing drywall can be a headache for a homeowner. Though you don’t have to fix the damage yourself, you still have to worry about it reoccuring. Here are the top 5 common causes of drywall damage. Click here to learn about them so that you can be aware for the future.

One of the joys of homeownership is waking up to discover one of your walls has started to fall apart thanks to an unnoticed water leak.

Drywall damage is a problematic and often complicated to repair issue many homeowners are unprepared for. If you notice holes, cracks or buckling in your walls, you should absolutely call in an expert to inspect it and hopefully repair it.

But first, what are some of the things that can cause damage to your drywall? Keep reading for more info.

1. Plumbing Leaks

One of the leading causes of broken drywall is water damage.

If your plumbing is older or has been improperly installed you may run into some major issues further down the road. One of these is water damaged drywall.

If you notice your drywall bulging, immediately inspect and repair the damaged water line that may be hidden there. Then you will be able to replace or patch the drywall.

2. Poor Fastening

When your drywall was installed it was most likely attached via joint fastening tape.

As time goes on, this thick tape can loosen due to moisture or age, and start to buckle the drywall it’s holding together. This will show up very obviously in your walls.

Sometimes it becomes obvious that drywall was poorly installed by nails popping through the wall. This happens when drywall nails aren’t set firmly in the stud.

If you notice a nail popping through, don’t hammer it back in place. It’s best to remove it and find the stud yourself before nailing it into place.

3. Cracking

Cracks can happen in poorly installed drywall. It most often occurs in ceilings. The moment a crack is noticed, you should absolutely contact an expert to come and repair the damage.

Cracked drywall is a safety issue. If you notice cracking happening often, you should have your roof inspected. Sometimes it is also caused by your house settling.

Don’t ignore cracking. Cracks will only get bigger and can turn into a very expensive and troublesome repair.

4. Termite Damage

Termites are a major issue for lots of homeowners.

If you notice termite damage immediately call an exterminator. Termite damage can be identified by pinholes, a hollow sound when you strike the wall, damaged paint and wood damage.

5. Holes

Some of the most obvious drywall damage are holes.

Any type of hole in your wall is considered a structural issue. Holes can be caused by any number of things. Furniture bumping too hard against the wall, doors blowing open and not being stopped before hitting the wall. Sometimes kids and their toys can cause damage.

It’s just one of those things. If you notice your drywall has holes, make sure to get it patched and repaired as soon as possible.

This will keep the drywall from cracking further, which could then lead to a whole wall replacement.

Have Drywall Damage? Call In the Experts

When it comes to repairing drywall damage it’s always a good idea to have a professional help you.

Sometimes damage can become even more extensive if not fixed properly. Call us for an inspection and quote the next time you think your drywall needs to be repaired.

Drywall Sizes and Thickness

Drywall has different sheet sizes for different products, along with different thicknesses. For a patch or remodel-type project, getting the proper size drywall is crucial.

The thicker the drywall, the stronger it is. This is especially important in horizontal applications like ceilings. Drywall that is too thin can sag overtime and give your project an unappealing look.

We’ve put together a listing of all drywall sizes, thicknesses and weights available for common drywall types. Check the drywall sizes and thickness chart for information on the kinds of drywall products you may need.

Residential Drywall Sizes

Since drywall is manufactured on continuous feed lines, there is no limit to the lengths for drywall. But there are practical limitations and it is cut to length after toward the end of the line.

Whether you need your drywall to be twenty feet long or shorter, drywall can be special ordered.

The only downside to this is that you have to buy one or more semi loads in order to get specially cut, which is not practical for a homeowner who is looking to repair a bathroom wall.

Why The Size of Your Drywall Matters

Getting the right size drywall sheet will help minimize joints and make your next project easier. With larger sheets of drywall, handling it can become a problem.

The two main issues are:

  1. Physically being able to lift and install it yourself
  2. Getting it into the right spot you need. Getting drywall around corners or up and down stairs without help can post problems.

Determining Existing Drywall Thickness

To determine the thickness of damaged drywall that you plan to replace, start by cutting a hole and using a tape measure to determine its thickness.

Be sure to use extra care when checking the thickness of drywall on a ceiling or inside a garage, where thicker drywall is usually placed. Plaster walls can also cause an issue with thickness.

Walls in your home that have rock lath and plaster on them is a type of drywall that is ⅜” thick, leaving you with material that is thicker than most standard issued drywall.

Drywall Sizes

  • ¼” Drywall – This the thinnest drywall on the market and is not recommended for use by itself. It is too weak to provide much support other than going over other surfaces. An easy way to solve a drywall repair problem is by laminating a new piece of ¼” drywall over damaged areas.
  • ⅜” Drywall – ⅜” drywall used to be the standard thickness, but now it is mostly used where the particular thickness is needed on a project. the standard thickness. It can also be used like ¼” drywall as a laminate over existing damaged to walls and ceilings. It is also lighter in weight compared to ½” inch and ⅝” inch drywall. Due to its thickness, it’s not recommended to be used on ceilings.
  • ½” Cement Board – Cement board thickness will usually match the thickness of drywall.
  • ⅝” Drywall – Drywall of this thickness will usually be made in a fire resistant form since it is mostly used on ceilings and in garages. The extra fiber makes it more resistant to fires and stronger for ceilings. Proportionally, it is heavier than ½” drywall.
  • ⅝” Cement Board – This thickness of cement board is mostly used in commercial buildings, not residential homes.

Different Types of Drywall

Each type of drywall is used for different purposes and it is possible for you to have up to four or more types of drywall installed in your home, depending on the location.

  • Regular Drywall – Regular drywall is by far the most common type of drywall that you will use inside your home, especially on the walls and ceilings. It is also the easiest drywall to cut.
  • Firecode Drywall – This drywall is thicker than the half-inch material due to its heavier fibrous core that makes it resistant to heat and provides fire protection. It is also harder to cut.
  • Moisture Resistant Drywall – Sometimes called “green board” (though drywall comes in other colors now), this drywall is used for areas like bathrooms where the humidity is higher.
  • Glass Mat Drywall – With the prevalence of mold issues, glass mat drywall is a variation of moisture resistant drywall and was developed to eliminate mold growth. Instead of being made of paper, the facing is instead made of fiberglass, which mold cannot grow on since there is no organic material present. This drywall is often found in new homes.
  • Cement Board – Since cement board is not made with gypsum, technically it’s not considered drywall. It’s  made by sandwiching a special cement core between two layers of fiberglass mat, making it the hardest of all to cut. This is mostly used behind ceramic tile and marble for high moisture areas.

All of the different types of drywall listed above may be found in your home, upwards to four or more different types. It really just depends on where they’re being placed.

When doing a repair in your home, make sure that you are sing the right thickness and type that you need.

Call an Experienced Drywall Company

Now that you know all of the drywall sizes available, you will be ready for your next drywall repair project.

Bill’s Drywall contractors are proud to offer a wide range of drywall services for residential property. Call 866-228-5321 to request an estimate.

[ Go to Source ]

Is It Better to Hang Drywall With Nails or Screws?

Drywall Screws Drywall Repair and Remodel

Better to Hang Drywall With Nails or Screws?

Nails and screws are the two most popular wood fasteners, but how do you know which one to use and when to use them?

Drywall screws are more secure when installed properly, but drywall nails are much cheaper and, in certain areas, easier to put in.

So which is better?

When planning a drywall installation, here are a few things to consider:

Ceiling Installations

If you’re planning a drywall installation on a ceiling, drywall screws are the wise choice.

Drywall screws offer the needed protection that will help keep the drywall in place.

Don’t get us wrong; drywall nails are tough, but not when gravity is working against them.

Wall Installations

When it comes to wall installations, drywall nails are every bit as effective as drywall screws, and much cheaper.

Building codes can call for up to double the amount of nails as screws for hanging the same piece of drywall, making drywall screws seem like the better option.

But when you factor in the price of having to purchase a nail gun in order to install drywall screws, the cheaper option is to go with drywall nails and a hammer.

Unless you already own a drywall screw gun, purchasing one for a small, affordable installation is not worth the money.

Nail Lengths

While there is a little wiggle room when choosing a drywall screw or nail, you don’t want to go under the recommended length of either.

Drywall screws should only penetrate the wood 5/8 to 3/4 inch, meaning your nails or screws should be at least 1 1/4 inches long when installing 1/2 inch drywall. 

3/4 inch drywall calls for a slightly longer nail (1 1/2 inches) and screw (1 3/8 inch).

To reduce the chances of “popping“, make sure your nails and screws have are a ring shank variety to provide better security.

Putting Nails and Screws in Successfully 

Regardless of what you utilize, you’ll need to implant the head of the nail or screw a bit more profound than the surface of the drywall.

With nails, you will have a slight dimple around the head; with screws, attempt and get the head around 1/32 of an inch underneath the surface of the drywall, making a slight space.

The spaces and dimples you make will later be loaded with joint compound and covered up.

In the event that you twist a nail while pounding, it’s best to continue pounding the nail through the drywall surface as opposed to attempting to pry it out.

Choose Bill’s Drywall for Your Next Project

With more than 30 years of experience, we have what it takes to deliver superior drywall work, no matter the size of your job.

Call 866-234-7168 and let us help you get started on your next drywall project.

[ Go to Source ]

How to Fix a Drywall Crack

drywall finishing

If you find a crack in your drywall, don’t panic. Your house isn’t falling apart.

In fact, small drywall cracks are normal, often appearing as a result of the house settling. And they’re easy to fix.

Instead of spending a bunch of money on a professional, take a look at this complete guide that’ll show you how to easily repair a drywall crack.

The Tools You’ll Need

Before you get started, make sure you have the right tools for the job.

If you try to use other tools you have lying around the house as “supplement tools,” you won’t make it very far into the project before you have to stop and buy the right tools anyway.

So, here’s what you’ll need:

  • Utility knife
  • 6-inch Taping knife
  • Mud pan (you don’t necessarily need a mud pan, but it will make it easier to apply drywall compound to the taping knife.)
  • Drywall compound
  • Fine-grit sandpaper
  • Paper drywall tape (fiberglass drywall tape is thicker and harder to repair visually. So for this guide, we will focus on paper drywall tape.)

Step 1

The first thing you need to do is clean out the crack. Take your utility knife and cut off any rough edges and to scrape away any loose material from inside the crack.

Step 2

Put some of the drywall compound into the mud pan and get a small amount on your taping knife. Apply a thin coat of compound over the crack.

Step 3

Cut a piece of tape long enough to cover the crack. If the drywall crack is an odd shape, you can cut small pieces of tape to follow the zigzaggy pattern.

Then place the tape immediately onto the drywall compound. You should put the tape on as quickly after you apply the compound as possible.

If you have a long or oddly shaped crack, it may be a good idea to cut the tape before you apply the compound.

Step 4

With the taping knife, push the drywall tape into the compound.

Make sure there aren’t any bubbles. If there is air under the drywall tape, it will stay there forever, creating a little bump on your wall. Make sure there aren’t any bubbles. If there is 

Apply another layer of compound over the top of the tape and wait for it to dry. (Drying may take several hours or even overnight.)

Step 5

Apply a second coat over the top. Make sure the edges of the compound blend with the rest of the wall. Don’t layer the compound too thickly or it will bump out from the wall.

Step 6

After the second coat is dry, apply a third and final coat. Again, wait for it to dry.

Step 7

Sand the patch of drywall compound with your fine-grit sandpaper until it is smooth. But be careful not to sand down to the drywall tape.

When you’re done sanding, you can repaint the patch the same color as the rest of your wall. Don’t forget to use a primer though.

If you don’t, the color won’t match your wall completely.

That’s All It Takes to Fix a Drywall Crack

The hardest part of this project is waiting for all those layers to dry. Everything else doesn’t take a lot of work and can be done quickly and easily.

Have bigger problems with your drywall you can’t fix on your own?

Head over to our drywall repair page and take a look at our services!